We – EPG Team the largest gearbox & motors , couplings and gears manufacturing unit in China with 5 various branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Modest AC Equipment Motor With Shaft Dia 18mm in 3-Phase
Little AC Motor
Functions:
one.Standard stctrue:ZH(Horizonal),ZV(Vertical)
2.Output:100W,200W,400W,750W,1500W,2200W,3700W
3.Gear ratio:3,5,10…1800
4.Motor standard knowledge:
S:3-phase motor,220-240/380-415V,50/60Hz
C:1-stage motor,220v,fifty-50Hz
E:1-section motor,110v,50/60Hz
DV:Double Voltage motor,110/220V,50Hz/60Hz
Z:Light-weight variety responsibility
five.Brake device: B: DC90V brake unit YB: With rsisase brake device
Motor specification:
| Product | three-stage motor | one-section motor |
| Security | IP54 with alum alloy terminal box,and other is IP20 | |
| Body materials | Alum alloy for 100-2200W Body,Alum alloy for 1#,2#,3#equipment case,4#,5#,6# cast iron for other people | |
| Responsibility | Ongoing operating | |
| INS.Class | B/F | |
| Setting | Temp:-10—+40centigrade Humidity:<90% |
|
| Voltage | 220V-240V/380-415V,fifty/60Hz | 110V/50/60Hz,220V/fifty/60Hz |
| Pole | 4P(6P) | 4P(6P) |
| Peak | <1000m | |
| Commencing | Immediate start | .1-.02kw capacitor .4-1.5kw double capacitors |
| Standard | GB755/IEC-60034 | |
Main parts notes:
| Elements identify | Notes |
| Gearbox | The output shaft diameter of gearbox 1#,2#,3# are 18,22,28mm separately.the materials of gearbox is alum alloy.4#,5#,6# are 32,40,fifty respectively.Gearbox is created of forged iron. |
| Gear piece | The material 40Cr mixes to HB280,then dealed with large frequency quencher HRC50.Gear should be processed by milling with substantial precision.The course is 6. |
| Gear shaft | The material 20CrMnTi will be changed into HRC60 by means of processing of cementite quencher.Gear shaft will be processed with equipment hobbing.Precision course is 6. |
| Motor shaft | The substance 40Cr mixes to HB280,then dealed with high frequency quencher HRC54.Lastly,equipment is reduce for the second.motor shaft will be processed with equipment hobbing.Precision course is 5-6. |
| Ball bearing | We undertake tight bearing with higher precision,to make confident longterm operating lift. |
| Oil seal | Equipment shaft presents priorith to enduring large temp,steering clear of oil infiltration. |
| Terminal box | Two type.a single is al alloy,which equips good capability of water-proof and dustproof.Security quality is IP54.The other is steel circumstance with deft composition.Protection quality is IP20. |
Gear of modest series:
one.The content of rotor is 40Cr,quench to HRC50-55 after rough rolling,two moments tough slicing,the equipment precision can get there ISO class6-7.
2.The materials of shafe equipment is 20CrMnTi,quench to HRC58-sixty one after rough rolling,two instances hard reducing,the gear precision can get there ISO class6-7.
2.The content of plate equipment is 40Cr,quench to HRC48-51 soon after rough rolling,grind,the precision can arrive ISO class6-7.
Brake sequence:
1.Affordable and compact.
two.Substantial stress-resistance,good insulation,insulation course F,can perform in diverse types of ambient.
three.Prolonged lifestyle,adopting abrasion-resistance guide-free,non asbestos friction plate,ma ept certain the lengthy existence.
4.It”s selective of assembling gap diameter and simple assembling.
five.Numerous assembling way meets distinct clients.
Be aware : It’s just the standard technological information for you reference, The specification this kind of as voltage, pace, torque, shaft can be custom-made by your requirements. Make sure you contact us for more details. Thanks.
FAQ
Q: What’re your primary products?
A: We at present produce Brushed Dc Motors, Brushed Dc Equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Substantial Precision Planetary Gear Box and many others. You can check out the specifications for earlier mentioned motors on our site and you can e mail us to advocate required motors per your specification way too.
Q: How to pick a ideal motor?
A:If you have motor photographs or drawings to present us, or you have in depth specs like voltage, velocity, torque, motor dimensions, wor ept method of the motor, necessary life time and noise degree and so on, make sure you do not hesitate to permit us know, then we can suggest appropriate motor for every your request accordingly.
Q: Do you have a personalized services for your common motors?
A: Of course, we can personalize per your ask for for the voltage, velocity, torque and shaft size/shape. If you require further wires/cables soldered on the terminal or need to have to incorporate connectors, or capacitors or EMC we can make it also.
Q: Do you have an personal design support for motors?
A: Sure, we would like to style motors independently for our clients, but it could need to have some mold creating cost and layout demand.
Q: What is actually your direct time?
A: Normally speaking, our standard regular merchandise will need 15-30days, a bit for a longer time for personalized products. But we are very flexible on the lead time, it will depend on the specific orders.
More about our goods and firm:
The use of first tools manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our company and the outlined substitute areas contained herein are not sponsored, accredited, or made by the OEM.
